Login       My Wishlist
  My Cart
$0.00 / 0 items
 
The Dead Bell
The Best Names in Tools
International Access
Global Shipping Options Available
  Our Catalog   Rough Plumbing   Pipes, Pipe Fittings & Accessories   Pipe Supports

Pipe Supports - 692 - Extreame Savings! Save up to 48%


Extreame Savings! Up to 48% off on Pipe Supports at The Dead Bell. Top brands include MIRO, Graphskill, Generic, Band-It, Perfect Pitch, ROOFTOP SLEEPER SUPPORT, LASCO, Mayhew Tools, PEXFLOW, Imperial Mfg Group Usa, & Holdrite. Hurry! Limited time offers. Offers valid only while supplies last.



12 Pack | 12''x12'' Fitted Support Pad for MIRO Rooftop Supports | Pipe Support Pad | Made of 100% Recycled Rubber
12 Pack | 12"x12" Fitted Support Pad for MIRO Rooftop Supports | Pipe Support Pad | Made of 100% Recycled Rubber
By MIRO
In Stock
$84.72

mpn: Support Pad 12x12cs12,

4.1 out of 5 stars with 118 reviews
MIRO Industries' custom support pads are designed specifically to fit the MIRO polycarboante non-penetrating supports. These slip-resistant pads have a small lip to hold the base to the pad and reduce movement on the rooftop while also protecting the roof membrane. The pads are heat molded using 100% recycled rubber.Prevents Damage to Roof Membrane. Slip Resistant. Designed to fit MIRO Polycarbonate Pipe Supports. Made of 100% Recycled Rubber | Made in the USA | Versatile | Durable |


2.5-CS-5 Elevate Rooftop Support | Pipe Support | Rooftop Block Stand | UV Resistant | Made of 100% Recycled Polycarbonate (PC) and Stainless Steel
2.5-CS-5 Elevate Rooftop Support | Pipe Support | Rooftop Block Stand | UV Resistant | Made of 100% Recycled Polycarbonate (PC) and Stainless Steel
By MIRO
In Stock
$19.69

mpn: 2.5-CS-5-MR.3,

4.9 out of 5 stars with 181 reviews
Elevate Supports are built to accommodate conduit, electrical and solar pipes, as well as all kinds of mechanical piping, or a random mix of them all. This model has a height range of 3.5 inches to 5 inches and is able to carry loads up to 115 lbs.Prevents Damage to Roof Membrane. Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes. Affix Pipes to Support with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included). Made of 100%


2.5-CS-7 Elevate Rooftop Support | Pipe Support | Rooftop Block Stand | UV Resistant | Made of 100% Recycled Polycarbonate (PC) and Stainless Steel
2.5-CS-7 Elevate Rooftop Support | Pipe Support | Rooftop Block Stand | UV Resistant | Made of 100% Recycled Polycarbonate (PC) and Stainless Steel
By MIRO
In Stock
$21.99

mpn: 2.5-CS-7-MR.3,

4.4 out of 5 stars with 66 reviews
Elevate Supports are built to accommodate conduit, electrical and solar pipes, as well as all kinds of mechanical piping, or a random mix of them all. This model has a height range of 3.5 inches to 7 inches and is able to carry loads up to 115 lbs.Prevents Damage to Roof Membrane. Support Water Lines, Gas Pipes, Electrical Conduit, Plumbing Pipes, Condensate Lines, Refrigeration Pipes. Affix Pipes to Support with Pipe Guides, Clamps, Tab Tape, or Other Hardware (not included). Made of 100%


12 Pack | 3-RAH Pipe Guide for MIRO Rooftop Supports | Attaches to Pipe Support | Made of 100% Aluminum
12 Pack | 3-RAH Pipe Guide for MIRO Rooftop Supports | Attaches to Pipe Support | Made of 100% Aluminum
By MIRO
In Stock
$85.44

mpn: PG 3-RAHcs12,

4.5 out of 5 stars with 207 reviews
Pipe guides can be attached to the MIRO Pillow Block series or the MIRO Dynamic Series supports to keep the pipe centered on the block. They are designed to fit loosely around the pipe to allow for pipe movement. Fits a 3'' Nominal Pipe and helps keep the pipe centered on the roller.Keeps Pipe Centered on Roller. Fits Loosley Around Pipe. Designed to fit MIRO Pipe Supports. Made of 100% Aluminum | Made in the USA |. 20 Year Warranty.


24 Pack | 3-R-2 Pipe Guide for MIRO Rooftop Supports | Attaches to Pipe Support | Made of 100% Aluminum
24 Pack | 3-R-2 Pipe Guide for MIRO Rooftop Supports | Attaches to Pipe Support | Made of 100% Aluminum
By MIRO
In Stock
$88.32

mpn: PG 3-R-2cs24,

4.9 out of 5 stars with 240 reviews
Pipe guides can be attached to the MIRO Pillow Block series or the MIRO Dynamic Series supports to keep the pipe centered on the block. They are designed to fit loosely around the pipe to allow for pipe movement. Fits a 3'' Nominal PipeKeeps Pipe Centered on Block. Fits Loosley Around Pipe. Designed to fit MIRO Pipe Supports. Made of 100% Aluminum | Made in the USA |. 20 Year Warranty.


Backing plate For M16 U-Bolt 119 mm Inside diameter T316 (A4) Stainless Steel Pack Size : 1
Backing plate For M16 U-Bolt 119 mm Inside diameter T316 (A4) Stainless Steel Pack Size : 1
By Graphskill
In Stock
$25.09

mpn: PLATE/T316/18-50*3-135-195, ean: 5055624420005,

4.4 out of 5 stars with 53 reviews
This backing plate is suitable for U-bolts or C-bolts (Square bolts) that have an M16 thread and is 119 mm inside diameter (between the legs) Hole Centres: 135 mm Hole diameters: 18 mm Material width: 50 mm Material length: 195 mm Material thickness: 3 mm Material Finish T316 Stainless Steel is suitable for anywhere you would use T304 BUT has the added advantage of being suitable for marine solutions. The molybdenum increases the corrosion resistance to withstand attack from many industrial


M16 Hemispherical Cup - Galvanised Mild Steel Pack Size : 1
M16 Hemispherical Cup - Galvanised Mild Steel Pack Size : 1
By Generic
In Stock
$10.64

mpn: HEMISPHERICAL/GALV/CUP-M16, ean: 5055624420142,

4.8 out of 5 stars with 292 reviews
Hemispherical Cup - Galvanised Mild Steel For vertical suspension on angled surface Hanger Rod thread diameter = M16 A 16 mm B dia = 41 mm C = 6 mm D dia = 18 mm E = 16 mm R Rad = 19 mm.


32 Pack | 1.5'' Pipe Guide for MIRO Rooftop Supports | Attaches to Pipe Support | Made of 100% Aluminum
32 Pack | 1.5" Pipe Guide for MIRO Rooftop Supports | Attaches to Pipe Support | Made of 100% Aluminum
By MIRO
In Stock
$91.20

mpn: PG 1.5cs32,

4.8 out of 5 stars with 197 reviews
Pipe guides can be attached to the MIRO Pillow Block series or the MIRO Dynamic Series supports to keep the pipe centered on the block. They are designed to fit loosely around the pipe to allow for pipe movement. Fits a 1.5'' Nominal Pipe. Includes pan head screws needed to mount the pipe guide to MIRO Pillow Block.Keeps Pipe Centered on Block. Fits Loosley Around Pipe. Designed to fit MIRO Pipe Supports. Made of 100% Aluminum | Made in the USA |. 20 Year Warranty.


BAND-IT C20299 201 Stainless Steel Bright Annealed Finish Band, 1/4'' Width X 0.020'' Thick, 100 Feet Roll
BAND-IT C20299 201 Stainless Steel Bright Annealed Finish Band, 1/4" Width X 0.020" Thick, 100 Feet Roll
By Band-It
SKU: #C20299
In Stock
$52.43

sku: C20299, mpn: C20299, ean: 0696738731318,

4.8 out of 5 stars with 101 reviews
BAND-IT Band is the industry standard in 201 stainless steel banding, clamping and fastening. BAND-IT Band offers high strength fastening and clamping and can be formed to any diameter and shape. Sets the standard with quality appearance. 201 Stainless Steel offers good resistance to oxidation and many moderate corrosive agents. Installs easily with the following tools: the Standard Banding Tool (C00169), the Heavy Duty Banding Tool (C00369), the Bantam Tool (C07569), the Bantam Strapping Tool


3-RAH-12 Dynamic Adjustable Height Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made in USA
3-RAH-12 Dynamic Adjustable Height Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made in USA
By MIRO
In Stock
$45.69

mpn: 3-RAH-12-MR.3,

4.3 out of 5 stars with 65 reviews
Designed specifically for use in expansion/contraction applications, this Dynamic Support uses a roller to allow for longitudinal movement while securely maintaining lateral alignment. These maintenance-free designs use self lubricating rollers, UV and temperature-stable polycarbonate, and stainless steel or hot-dip galvanized hardware. The appropriate MIRO support pad is recommended for additional protection of the roof membrane. Built to accomodate pipe up to 3 inches, this adjustable support


4-RAH-7 Dynamic Adjustable Height Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made in USA
4-RAH-7 Dynamic Adjustable Height Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made in USA
By MIRO
In Stock
$32.24

mpn: 4-RAH-7-MR.3,

4.8 out of 5 stars with 82 reviews
Designed specifically for use in expansion/contraction applications, this Dynamic Support uses a roller to allow for longitudinal movement while securely maintaining lateral alignment. These maintenance-free designs use self lubricating rollers, UV and temperature-stable polycarbonate, and stainless steel or hot-dip galvanized hardware. The appropriate MIRO support pad is recommended for additional protection of the roof membrane. Built to accomodate pipe up to 4 inches, this adjustable support


Perfect Pitch Adjustable Pipe Fastening System for AC Drainage (Pack of 5)
Perfect Pitch Adjustable Pipe Fastening System for AC Drainage (Pack of 5)
By Perfect Pitch
In Stock
$29.99
$15.50
You Save: 48%

ean: 0764759019101,

4.7 out of 5 stars with 26 reviews
With the Perfect Pitch, you can quickly and confidently slope pipes or lines to your required pitch. Forget finding scraps or blocks to prop up your HVAC installations. Leave the job site with peace of mind, use Perfect Pitch on your next HVAC install.Includes 5 supports, 5 pipe clamps, and instructions.. Fits 1/2'', 3/4'', and 1'' pipes. Supports all pipes including PVC, copper, galvanized piping and electrical conduit. Can handle loads up to 50 lbs.. Stop using loose scrap materials to


Rooftop Support | Saddle Pipe Support with Strut and Hardware | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable
Rooftop Support | Saddle Pipe Support with Strut and Hardware | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made of 100% Recycled Plastic | Heavy and Extremely Durable
By ROOFTOP SLEEPER SUPPORT
In Stock
$16.99

mpn: RSS-SS_10,

4.4 out of 5 stars with 126 reviews
Each pipe stand will accommodate up to a 3 inch schedule 40 customary or ''trade'' size pipe. The maximum outside diameter of the pipe that can be cradled int he Saddle Support is 3.25''. A rooftop support block or stand used to support rooftop gas pipes, electrical conduit, solar arrays, satellites, antennas, cable tray, disconnects, and junction boxes. The saddle support can also be used in mechanical, plumbing, refrigeration, HVAC, and electrical applications. Unique design absorbs thermal


LASCO 13-1661 Pipe Strap fits 3/8'' Od Copper Tubing
LASCO 13-1661 Pipe Strap fits 3/8" Od Copper Tubing
By LASCO
In Stock
$10.39

mpn: 13-1661, ean: 0052151228703,

4.2 out of 5 stars with 234 reviews
Lasco 13-1661 copper pipe strap, fits 3/8-inch od copper tubing, 4-pack. Copper tube straps with 2-holes for mounting. Fits 3/8-inch outside diameter copper tubing. High-quality copper construction for durability and dependability. Tube straps hold tubing in place! made in USA, 4-pack. Larsen supply a third generation family owned and operated company with over 80 years of experience has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk sku's. We


Mayhew Pro 31965 Pneumatic Muffler and Tailpipe Remover
Mayhew Pro 31965 Pneumatic Muffler and Tailpipe Remover
By Mayhew Tools
In Stock
$15.49
$13.63
You Save: 12%

mpn: OLD31965, ean: 0045256319650,

4.3 out of 5 stars with 16 reviews
The Mayhew 31965 Pneumatic Muffler and Tailpipe Remover is used for body, chassis, and exhaust applications. Features a standard .401 shank size. Black oxide finish for additional rust protection. Made in the USA. Over all length: 8-1/4-Inch, body size: 0.401-Inch, body type: Round, blade width: 5/8-Inch, and weight: 0.39-pound. Comes with an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of


Pexflow OTCR0038-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 3/8 INCH, Stainless Steel Pack of 50
Pexflow OTCR0038-50 Oetiker Style Pinch Clamps Pex Cinch Rings, 3/8 INCH, Stainless Steel Pack of 50
By PEXFLOW
In Stock
$19.99

mpn: OTCR0038-50, ean: 0804595278376,

4.2 out of 5 stars with 172 reviews
Pex clamps are also commonly called “PEX cinch clamps” and are pre-formed Stainless steel bands with a distinctive “ear”. PEX clamps are used in combination with a PEX clamp tool (or PEX cinch tool) to compress the PEX tubing over the barbs of a PEX crimp style fitting. They come in sizes from 3/8 inch to 1 inch with clamp size corresponding both to the pipe and fitting size, for example, 1/2 inch clamps for 1/2 inch PEX tubing and fittings, 3/4 inch - for 3/4 inch pipe and fittings and


Imperial Manufacturing Flue Thimble Single Wall 6 '' Dia. X 6 '' Galvanized
Imperial Manufacturing Flue Thimble Single Wall 6 " Dia. X 6 " Galvanized
By Imperial Mfg Group Usa
In Stock
$16.25

mpn: GV0931, ean: 0063467145103,

4.5 out of 5 stars with 248 reviews
6'' x 6'', 28 GA Galvanized Thimble.Imperial Mfg Group Usa. GV0931. 6. NEW. 3.3.


3-RAH-7 Dynamic Adjustable Height Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made in USA
3-RAH-7 Dynamic Adjustable Height Rooftop Support | Pipe Support | Rooftop Block Stand with Pipe Cradle and Sleeper Curb | UV Resistant | Made in USA
By MIRO
In Stock
$29.39

mpn: 3-RAH-7-MR.3,

4.1 out of 5 stars with 42 reviews
Designed specifically for use in expansion/contraction applications, this Dynamic Support uses a roller to allow for longitudinal movement while securely maintaining lateral alignment. These maintenance-free designs use self lubricating rollers, UV and temperature-stable polycarbonate, and stainless steel or hot-dip galvanized hardware. The appropriate MIRO support pad is recommended for additional protection of the roof membrane. Built to accomodate pipe up to 3 inches, this adjustable support


Holdrite 103-18 Galvanized Steel Support Bracket with 1-3/8-Inch Keyed Holes to be Integrated with No.701 or No.704 PEX Turnout, Pack of 50
Holdrite 103-18 Galvanized Steel Support Bracket with 1-3/8-Inch Keyed Holes to be Integrated with No.701 or No.704 PEX Turnout, Pack of 50
By Holdrite
In Stock
$126.54

mpn: 103-18, ean: 0671119103182,

4.5 out of 5 stars with 33 reviews
The Holdrite 103-18 is a galvanized steel support bracket with 1-3/8'' keyed holes on 2'' centers. Positions 1/2'', 3/4'' or 1'' copper or CPVC tubing and 3/8'' or 1/2'' PEX. This versatile bracket is ideal for sink, lavatory and water closet plumbing solutions. Integrates with Holdrite #701 or #704 inserts. UPC/IPC/IAPMO listed. Made in the USA. for 30 years, HOLDRITE has been the market leader in pipe support and alignment bracket systems. The focus of ''Converting Makeshift Plumbing Methods



Viewing Page 1 of 1

View more products in Pipes, Pipe Fittings & Accessories.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - thedeadbell.com. All Rights Reserved.