Carpentry Squares - 99 - Page 5 - Mega Sale! Save up to 21%

mpn: 35072675,

Ideal for precision layout work. Blades are hardened and tempered with a satin-chrome finish..

mpn: 7000-002, ean: 0791617731387,

This 2 inch premium engineer/machinist square is manufactured in the USA by Precision Engineering Corporation (PEC Tools) in strict accordance with derived tolerances of the Federal Specifications Code No. GGG-S-656E 29 Jan 1996. It has true right angles for both inside and outside edges and is guaranteed to be square to within +/- 0.0006 inches (Thats 6 ten-thousandth of an inch) over the entire length of the blade. This square features a hardened carbon tool steel blade and base that are

mpn: 61503743314,

* Blades are fully hardened and tempered. * Reversible protractor heads for hardened squares. * Double-indexed protractor is graduated 180 deg. in both directions. * Finished in baked enamel. * Square Head has level and scriber point. * Micro-fine blade graduation. * Easy to read satin chrome finished blades. * Sets with cast heads or with hardened heads. Blade Graduations: 4R - 8ths, 16ths, 32nds, 64ths 16R - 32nds, 64ths, 50ths, 100ths E/M - 32nds, 0.5mm, 64ths, mm M - mm, 0.5mm, mm, 0.5mm

mpn: 61505183316,

* Blades are fully hardened and tempered. * Reversible protractor heads for hardened squares. * Double-indexed protractor is graduated 180 deg. in both directions. * Finished in baked enamel. * Square Head has level and scriber point. * Micro-fine blade graduation. * Easy to read satin chrome finished blades. * Sets with cast heads or with hardened heads. Blade Graduations: 4R - 8ths, 16ths, 32nds, 64ths 16R - 32nds, 64ths, 50ths, 100ths E/M - 32nds, 0.5mm, 64ths, mm M - mm, 0.5mm, mm, 0.5mm

mpn: 61506943308,

* Blades are fully hardened and tempered. * Reversible protractor heads for hardened squares. * Double-indexed protractor is graduated 180 deg. in both directions. * Finished in baked enamel. * Square Head has level and scriber point. * Micro-fine blade graduation. * Easy to read satin chrome finished blades. * Sets with cast heads or with hardened heads. Blade Graduations: 4R - 8ths, 16ths, 32nds, 64ths 16R - 32nds, 64ths, 50ths, 100ths E/M - 32nds, 0.5mm, 64ths, mm M - mm, 0.5mm, mm, 0.5mm

mpn: 61507003308,

* Blades are fully hardened and tempered. * Reversible protractor heads for hardened squares. * Double-indexed protractor is graduated 180 deg. in both directions. * Finished in baked enamel. * Square Head has level and scriber point. * Micro-fine blade graduation. * Easy to read satin chrome finished blades. * Sets with cast heads or with hardened heads. Blade Graduations: 4R - 8ths, 16ths, 32nds, 64ths 16R - 32nds, 64ths, 50ths, 100ths E/M - 32nds, 0.5mm, 64ths, mm M - mm, 0.5mm, mm, 0.5mm

mpn: 61508303309,

* Blades are fully hardened and tempered. * Reversible protractor heads for hardened squares. * Double-indexed protractor is graduated 180 deg. in both directions. * Finished in baked enamel. * Square Head has level and scriber point. * Micro-fine blade graduation. * Easy to read satin chrome finished blades. * Sets with cast heads or with hardened heads. Blade Graduations: 4R - 8ths, 16ths, 32nds, 64ths 16R - 32nds, 64ths, 50ths, 100ths E/M - 32nds, 0.5mm, 64ths, mm M - mm, 0.5mm, mm, 0.5mm

ean: 0043127073618,

This offer is for 1 - NEW in the original box,12'' Combination Square. Made By Brown & Sharpe MFG., Co. MADE USA! A high quality USA made 12'' combination square, complete with a with a 12'' blade with No.4 graduations, a square head and a centering head. Combination squares are commonly used for layout, set-up, checking heights and depths, and setting angles. They are also often used as try squares, center gauges, bevel protractors, and rules. Measuring Graduation(s): 8ths, 16ths, 32nds,

mpn: 71690531723,

* Blades are fully hardened and tempered. * Reversible protractor heads for hardened squares. * Double-indexed protractor is graduated 180 deg. in both directions. * Finished in baked enamel. * Square Head has level and scriber point. * Micro-fine blade graduation. * Easy to read satin chrome finished blades. * Sets with cast heads or with hardened heads. Blade Graduations: 4R - 8ths, 16ths, 32nds, 64ths 16R - 32nds, 64ths, 50ths, 100ths E/M - 32nds, 0.5mm, 64ths, mm M - mm, 0.5mm, mm, 0.5mm

mpn: 71690781723,

* Blades are fully hardened and tempered. * Reversible protractor heads for hardened squares. * Double-indexed protractor is graduated 180 deg. in both directions. * Finished in baked enamel. * Square Head has level and scriber point. * Micro-fine blade graduation. * Easy to read satin chrome finished blades. * Sets with cast heads or with hardened heads. Blade Graduations: 4R - 8ths, 16ths, 32nds, 64ths 16R - 32nds, 64ths, 50ths, 100ths E/M - 32nds, 0.5mm, 64ths, mm M - mm, 0.5mm, mm, 0.5mm

mpn: 97940702865,

Drill Size: 25/64 / Broach Length: 9-7/8 / Standard Square Broaches are H.S.S. push type; designed for one pass finishing when used with arbor or hydraulic press, or vertical broaching machine.High Speed Steel. Square Size: 3/8''. Tolerances: .3755 - .3765. Diameter Across Corners: .5230 - .5250. Pilot Diameter: .3901.

You Save: 5%

mpn: 9-12-4R, ean: 0049659500424,

Complete combination set feature the combination square with a center head and with a non-reversible protractor. With reversible lock bolts, scriber, spirit level in both square head and protractor head, direct reading double 180 degree protractor scale, and hardened steel, machine divided blade. Cast iron heads with black wrinkle finish.Cast iron heads with black wrinkle finish. Graduation: No. 4R - 1/8'', 1/16'', quick reading 1/32'', 1/64''. 4R Grad: 8ths, 16ths, Quick Reading 32nds, 64ths.

You Save: 10%

mpn: 3020-6, ean: 0049659122275,

The Starrett 3020-6 toolmakers'-grade non-graduated stainless steel square is accurate to 0.0002'' (0.005 mm) and machined at the inner corner for added clearance of burrs and dirt and is used to verify the squareness of tools and workpieces. The beam and blade are hardened, ground, and lapped to provide durability and high accuracy. The blade length from the inner corner to the end of the blade is 5-29/32'' (150 mm). The beam length is 3-29/32'' (100 mm). The square includes a fitted plastic

mpn: 453C, ean: 0049659523478,

The sliding blades of this tool and die makers' square can be adjusted at an angle (up to approximately 10 degree) with the beam for measuring the clearance in dies. The larger knurled thumb screw locks the blades at any position, and the smaller one tilts the blades at an angle. To set the blades at an angle, first release the blade clamp screw, then the blade may be tilted to the desired angle by turning the small knurled screw into the beam. The blade can be held in position by tightening

mpn: C434-12-16R, ean: 0049659515497,

Complete combination set feature the combination square with a center head and with a reversible protractor. As the name indicates, this tool can be used for many different purposes - a complete substitute for a whole set of common solid try squares, a 45 degree miter, a depth gauge, a height gauge, a marking or scribing gauge, a level, a plumb and, by withdrawing the blade, it can also be used as a precision rule. This saves littering the workbench with too many tools, each being necessary but

You Save: 21%

mpn: 20-4 1/2, ean: 0049659501322,

This hardened steel square is used when extreme accuracy is required. The beams and blades are hardened, ground, and lapped to insure parallelism and straightness. Made of high quality tool steel, with the finest of craftsmanship throughout.Made of high quality tool steel. Squareness accuracy to 0.0001'' (0.0025mm) every 6'' (150mm). The beam is grooved at the inner corner for clearance of burr or dirt. Length of blade from the inner edge of the beam to the end of the blade.

mpn: C33HC-4-4R, ean: 0049659563917,

The combination square with center head is a basic combination set. The center head is a convenient and accurate way to find the center of round work. Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron

mpn: C33H-12-4RW/SLC, ean: 0049659668971,

Starrett combination square consist of a machine-divided, hardened and tempered steel rule (or blade) on which is mounted an adjustable square head. A reversible lock bolt allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This ensures true alignment of the blade and heads. Square head are made of cast iron and are not to be confused with the cheap imitation plastic or die cast heads on the market. The value of Starrett tools is that they are accurate and

SKU: #41891

You Save: 21%

sku: 41891, mpn: 52-370-012-0, ean: 0646795162549,

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27'' and is accurate to + or - 0.00006''. Resolution is 0.00001'' and the measuring depth is 3.15''. The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal

mpn: 439-24, ean: 0049659521115,

Tool is ideal for laying out or cutting valleys or hips of different pitches, done as follows: Rotate the blade to the desired pitch, place the face of the stock against the work and draw a line. Then place the square end of the stock against the line and draw the complementary line. This gives the complementary angle automatically, without calculation.This versatile tool is invaluable for carpenters, builders, patternmakers, cabinetmakers and all mechanics. Combines seven tool functions in one