10-pack Gx24q to E26 Lamp Base Converter,15.5mm 4pin,gx24q to E26 Adapter, Gx24q to E26/e27, Lamp Holder Converter, Rohs. Short Center Square Part, for USA Applications! Need Bypass the ballast!
10-pack Gx24q to E26 Lamp Base Converter,15.5mm 4pin,gx24q to E26 Adapter, Gx24q to E26/e27, Lamp Holder Converter, Rohs. Short Center Square Part, for USA Applications! Need Bypass the ballast! by E-Simpo at The Dead Bell. MPN: GX24Q-E26. Hurry! Limited time offer. Offer valid only while supplies last. 10pcs Gx24q to E26 adapter, G24Q to E26/E27 Lamp base converter, Rohs. 4 pin led light bulb socket - Gx24q to E26 Lamp base adapter: - Suitable for G24Q-1,G24Q-2,G24Q-3, GX24Q-1, GX24Q-2, GX24Q-3 Lamps socket: LED,Halogen, CFL Light Base Converter Works for 4-Pin CFL with G24q-1: 10w 13w Quad Tube GX24q-1: 10w 13w Triple Tube G24q-2: 18w Quad Tube GX24q-2: 18w Triple Tube G24q-3: 26W 32w Quad Tube GX24q-3: 26w 32w Triple Tube- Voltage Workable: 85-265V AC - Material: anti-burning PBT, Copper
Product Description & Reviews
10pcs Gx24q to E26 adapter, G24Q to E26/E27 Lamp base converter, Rohs. 4 pin led light bulb socket - Gx24q to E26 Lamp base adapter: - Suitable for G24Q-1,G24Q-2,G24Q-3, GX24Q-1, GX24Q-2, GX24Q-3 Lamps socket: LED,Halogen, CFL Light Base Converter Works for 4-Pin CFL with G24q-1: 10w 13w Quad Tube GX24q-1: 10w 13w Triple Tube G24q-2: 18w Quad Tube GX24q-2: 18w Triple Tube G24q-3: 26W 32w Quad Tube GX24q-3: 26w 32w Triple Tube- Voltage Workable: 85-265V AC - Material: anti-burning PBT, Copper Contact Note: 1. Please distinguish the pin base types: there are G24, 2P 4P, and G23, Gx23 etc. Check your old CFL lamp base so to confirm the existing fixture is G24q or Gx24q socket. If your socket is 2P, pls choose G24d-E27: https://www.amazon.com/dp/B017T1UJEE 2. No Ballast is Required. It is 100% that PL-C downlight fixture has ballast inside. Dismantle ballast before install the LED light, otherwise the ballast will make resonance high voltage which destroy the light, reviews like burnt, smell, hot, flicking are all results that not bypass the ballast correctly. 3. Even you are replacing with E26/E27 CFL, you need remove the ballast also. Otherwise, the CFL E26/e27 Lamp will not work on. 2. How to bypass the ballast? 1.Off the Power. 2. Find the Ballast. Usually it is embedded inside the ceiling fixture. Pls pull off the existing PL lamp, reflector. Leave wire in junction box,find the ballast. 3. Normally, the Ballast has a black and white wire on the input side (AC input side,100-120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut. 4.Then you can connect the two red wires to the black wire. 5.Next, connect the two blue wires to the white wire. now ballast is bypassed
Features & Highlights
- This is 4P, NOT FOR 2P;Need BYPASS OR REMOVE the ballast, otherwise, it doesn't light on. G24q Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter - Q series has a shorter tip than D series and is more common in the US.
- Suit for G24Q-1, G24Q-2.G24Q-3, GX24q-1,GX24q-2,GX24q-3 socket,Works for 4-Pin CFL with G24q-1 Base:10w 13w Quad Tube; GX24q-1 Base:10w 13w Triple Tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube; If your socket is 2P, buy: https://www.amazon.com/dp/B017T1UJEE Physically change the contact.
- THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.
- All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.
- There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin-based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.
|Item Weight:||0.05 pounds|
|Item Size:||1.5 x 2.3 x 2.3 inches|
|Package Weight:||0.6 pounds|
|Package Size:||4.4 x 1.6 x 1.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By CARLO GAVAZZI
By CARLO GAVAZZI
By DEB-STOCKO USA LLC
mpn: SN33884-3PK, ean: 0705554368148,
By Arroyo Craftsman
By Arroyo Craftsman